The R-Net is based on saltwater sponges and passive Ag/AgCl electrodes that are held in place with a durable and flexible silicone structure.
R-Net: The EEG Net from Brain Products
The actiCHamp Plus can be combined with all our active as well as passive electrode systems - incl. the R-Net, and is powered by a sturdy lithium-ion battery, the PowerUnit.
The LiveAmp is a wearable, 24-bit amplifier - available with 8, 16, 32 and also with 64 channels. As it is wireless and allows you to store your recorded data internally (i.e. on an exchangeable memory card), there are no mobility limitations.
LiveAmp 8 / 16 / 32
With the LiveAmp 64, you can record high density and high-quality EEG without mobility limitations.
The first BrainAmp MR amplifier for EEG/fMRI simultaneous acquisition was manufactured by Brain Products more than a decade ago and represented a real technological breakthrough.
The V-Amp records a great variety of signals such as EEG, EOG, ECG, EMG and the full range of evoked potentials.
The BrainCap makes the preparation time very fast and assures high subject comfort as well as high-quality data recordings.
The actiCAP is the go-to solution for reliable and flexible high-quality EEG recordings.
actiCAP slim / actiCAP snap
The analysis software for EEG/ERP research
Whether you are aiming for unlocking mechanisms of brain connectivity and function, or for enhanced diagnostic use on epileptiform data, BESA Research 7.1 will help you to achieve your targets reliably and with more pathways than ever before.
BESA Research 7.1
BESA MRI is software to generate individual head models (BEM / FEM) that can be used for EEG and / or MEG source analysis.
BESA MRI 3.0
The Quick-30 (v 3.0) incorporates a host of mechanical and structural enhancements for faster set-up and significantly increased durability and wear-time.
Measure fNIRS in high-density set-ups, from anywhere on the head, concurrently with (nearly) any other modality.
With industry-leading 8mm (as opposed to 10mm) separation, you can be assured that the signal recorded by these short-distance detectors is mainly from the scalp and not the brain.
NIRx Short-Distance Detectors
Mix and match tension levels to achieve the right balance of data quality and subject comfort. Each subject is unique!
NIRx Spring Loaded Grommets
Our standard probes comfortable, but we also offer specialized probes for long-term measurements and NIRS measurements on infants and children.
NIRx Blunt Tip Optodes
The single tip optodes (offered for both sources and detectors) are good for all-around use on adults, juveniles, and older children.
NIRx Single Tip Optodes
The low-profile optodes work well with the NIRScout Extended Plus and laser sources to deliver excellent data quality in NIRS measurements concurrent with TMS, MRI, or MEG.
NIRx Low-Profile Optodes
The dual tip optodes are available for active and passive sources and detectors on all NIRx devices (NIRScout, NIRSport, and NIRSport2) and allow for faster and more comfortable setups.
NIRx Dual Tip Optodes
This software offers the ability to take data from any NIRScout, NIRSport, or NIRSport 2 and fit it into a BCI experiment without having to invest time and effort in writing your own real-time code framework.
movisens is proud to be the first company to provide a sensor trigger for Experience Sampling and Ecological Momentary Assessment studies
SensorTrigger – Interactive Assessment
The LightMove 4 opens new possibilities for researchers who understand the interplay between light and physical activity, allowing their research to expand and contribute to this growing body of knowledge.
LightMove 4 – Light and Activity Sensor
As part of the new sensor generation, the EdaMove 4 takes the proven quality of the EdaMove 3 and incorporates the most sought after improvements from extensive discussions with researchers in the field.
EdaMove 4 – EDA and Activity Sensor
The EcgMove 4 strengthens it's position as the go to device for researchers who care about high quality ECG and Activity data.
EcgMove 4 – ECG and Activity Sensor
SIGGI-2 is a lab tool with parameters in the micro-volt range.
This cap is equipped with actiCAP SNAP holders for the actiCAP slim electrodes, for use with the actiCAP / actiCHamp system.
Cap with actiCAP SNAP holders (for actiCAP Slim electrodes)
The BrainCap for Sleep is a complete cap with built-in electrodes for EEG, EOG and EMG recordings, optimized for sleep recording situations.
The new Quick-20r features electrical, mechanical and structural enhancements for faster set-up, extended wear time, enhanced reliability, and artifact immunity.
The Wireless Trigger provides a fully mobile solution for recording event markers in EEG data.
Connect to eye trackers and other recorders without the need for software or algorithmic timing compensation.
The unit can be pre-calibrated and sealed. All the user does is to point the unit at the action.
CXS CODA Sensor Units
The CX1 combines three motion sensing arrays into one unit. This allows a standalone CX1 unit to make a complete 3D measurement without reference to any other units.
CX1 CODA Sensor Units
A MiniHub provides power and data connections for one or two CX1 or CXS units.
A central control unit from a Codamotion system with combined power and data connections for up to eight CODA sensor units.
Whilst the ODIN software provides an easy-to-use graphical interface for movement analysis, it is often the case that computer programmers, engineers, and systems integrators need to work directly with 3D measurements in real-time.
Codamotion RTNet SDK
The ODIN software platform is familiar to movement analysis researchers, clinicians, and biomechanists around the world.
Every Codamotion unit is pre-calibrated in the factory to measure coordinates in 3D and in real-time, with fully automatic marker labelling programmed into the hardware.
Portable Indoor System
MREyes is a novel solution that allows operators to see, and to record, a clear view of the subject’s eyes. This can be used in applications as simple as verifying if the eyes are open or closed, or in watching alertness or changes in gaze.
The Transcranial Focal Stimulator is designed to be compatible with our unique concentric ring electrodes.
Transcranial Focal Stimulator
The outer ring and the center disc are used for delivering focal stimulation.
Concentric Ring Electrode (CRE) for Stimulation
The t-Interface serves to configure the TCRE electrode elements, route, and pre-amplify the signals.
t-Interface 20 | v2.0
The TCRE performs the Laplacian automatically and takes bipolar differences of the surface potentials from its three closely spaced electrode elements.
t-Lead: Tripolar Concentric Ring Electrode (TCRE)-based sensor
The Dev Kit includes everything you need to undertake EEG experiments and custom hardware development: a 32-channel amplifier, inputs for CGX dry electrodes, ExG’s and traditional wet caps, and a headband for mounting dry electrodes.
Our newest amplifier has 20 channels and is small enough to fit in your hand. Amplifier includes standard DB-25 connector for use with off-the-shelf wet caps.
CAMP Compact Amplifier
The AIM Gen2 is a compact, sophisticated unit that adds heart rate, temperature, respiration, GSR, PPG/HRV/SpO2 and more to any EEG system.
AIM Physiological Monitor
With NIRScout, you can measure fNIRS from anywhere on the head concurrently with (nearly) any other modality. It is our most versatile solution for fNIRS researchers.
The USB 2 Adapter (also known as BUA) serves as a USB interface to connect any BrainAmp amplifier with the recording computer.
USB 2 Adapter (BUA)
The TriggerBox helps to handle and merge triggers arriving from different sources, which is quite often a requirement in complex laboratory setups.
TriggerBox / TriggerBox Extension
A must-have solution designed to boost data quality for concurrent EEG and fMRI recordings
StimTrak combines creativity and precision, making it a very versatile tool which is destined to become a must-have for any kind of laboratory.
Non MR compatible sensors for peripheral signal recordings
Sensors non MR compatible
To meet the demands of our customers we are continuously working on developing sensors with the capability to measure peripheral physiological signals in addition to EEG in the MR scanner.
Sensors for MR
MR usable sensor for parallel respiratory measurements
Respiration Belt MR
The Brain Products Respiration Belt is used to measure the thoracic or abdominal respiratory movements.
BrainVision RecView is an advanced solution designed for real-time analysis of data received over the Ethernet network via TCP-IP directly from BrainVision Recorder.
The new BrainVision Video Recorder Kit uses a high-resolution network camera, integrated with BrainVision Recorder to provide you with excellent synchronization of your video and EEG recordings.
Recorder add-on: BrainVision Video Recorder Kit
BrainVision Recorder is a multifunctional recording software designed to provide our amplifier customers with an extremely versatile and easy-to-use platform for recording setup and execution.
Rechargeable battery to be used in the lab and the MR environment
The Photo Sensor is a valuable tool to check the performance of a monitor or any experiment control software. This becomes essential if visual stimuli are planned to be presented on a tablet or cell phone display.
The wireless MOVE is a solution that replaces the existing cables connecting electrodes and amplifier with wireless-based communication.
The LiveCap is a fully customizable cap, especially designed for use with LiveAmp amplifiers to provide a highly comfortable mobile EEG recording solution.
Combining the LiveAmp with the LiveAmp Sensor and Trigger Extension (STE) makes it possible to add additional physiological signals to your mobile EEG research.
LiveAmp Sensor & Trigger Extension (STE)
LabSim is a small and handy signal generator, able to generate signals required to test the input ports of different amplifiers.
Add this valuable accessory to your already existing BrainAmp ExG MR amplifier and record GSR of laboratory-standard quality even during functional MRI!
GSR MR Sensor
The EP-PreAmp can be used virtually for any scientific application benefiting from simultaneous measurement of EEG & (up to 16) bipolar signals carried out with a low noise preamp.
CapTrak is a light, hand-held scanner equipped with two integrated cameras and an intuitive, easy-to-use software for fast electrode localization.
This solution allows the TMS coil to be placed very close to the scalp and elicits the evoked response with low magnitude stimulus.
Superior solution for combining EEG & fMRI
The BrainCap MEG is a complete configured cap with built-in electrodes for EEG Recordings with simultaneous MEG.
A quick-install wet-cap based system with active electrodes in a standard 10-10 (64-Channel) or 10-5 (128-Channel) configuration, all with a detachable amplifier for the freedom to conduct even the most demanding experiments.
The BrainAmp ExG MR bridges this gap and makes the recording of bipolar and polygraphic signals in the MRI environment a simple procedure.
BrainAmp ExG MR
The BrainAmp amplifier is a compact solution for neurophysiology research that can be combined with other units within the same product family to cover a vast range of possible application areas.
The standard in combined EEG & fMRI recordings
BrainAmp MR plus
The BrainAmp ExG amplifier is a bipolar amplifier which can be used to record EMG, ECG, EOG and polygraphic channels such as GSR (Galvanic Skin Response), acceleration, temperature and blood pulse with an extremely compact design.
The BrainAmp DC includes all the outstanding features of the BrainAmp amplifier with the addition of the DC recording mode as well as with multiple hardware filtering options.
The BIP2AUX Adapter is a tiny, analogue differential DC amplifier that amplifies the incoming signal in order to make it measurable and relays it through the auxiliary input ports of the V-Amp and the actiCHamp.
In order to make it easier and more convenient to evaluate our software solutions for EEG/EP recordings and analysis we are introducing a new trial concept, the so-called "Application Suite Trial Package".
Application Suite Trial Package
actiCAP Xpress Twist: dry, fast & comfortable
actiCAP Xpress Twist
Although the variety of dry electrode systems available on the market kept increasing over the past years, we were aiming for something more flexible, comfortable and user friendly.
MR usable sensor to capture movements in 3 dimensions
Acceleration Sensor MR (3D)
We present for the first time Single Active Electrodes with headbox-like power supply, to plug in single electrodes on demand.